My choice for cutting boards, plus a tip

Here’s my pick for cutting boards… and please, if you do anything I recommend, please, please, please throw away any and all glass cutting boards. They ruin knives and speaking of using knives on glass cutting boards, that sound is somewhat reminiscent of fingernails on a chalkboard.

But back to the subject at hand: I mostly use my bamboo cutting board… but when I’m cutting proteins I use the rubber cutting board from KitchenAid.

And how did I decide which size(s) to buy? I hear this is the way to do it: Lay your largest knife on the cutting board from corner to corner, diagonal on the board. There should be at least 1/2 inch on both ends of the knife. Seems to work well for me…

I own and use two different sizes of each cutting board: 1) larger cutting boards for the bigger projects, and 2) smaller cutting boards for the quick little slice of cheese or small tomato.

But there’s a little bit of care needed for each both board.

On the rubber cutting boards, once the grooves on the board become too deep they become harbors for bacteria. And believe me, you don’t want to harbor bacteria. So, I always wash the rubber cutting board in the dishwasher (where the water gets hot enough to truly disinfect that board). And then it needs to be replaced eventually… you can’t use this board forever.

And on the wooden/bamboo cutting boards, you have to keep them moist. If you do not, the wood starts to crack and the board eventually falls apart. Here’s the process I take on my bamboo boards.

Keeping the wooden/bamboo cutting boards moist with a mineral oil is a quick process. How often you need to do this depends on how often you use and wash the board. In the picture above you see a well-oiled board (on top) and a very dry board (underneath).

These two boards are made of the same material, by the same manufacturer, etc… but one has been oiled recently while the other one is obviously dry.

So, simply using a papertowel… I move some mineral oil around the board and let it soak in. Super dry boards will use a lot of oil… and this board was hungry. So, I kept at it for a while…

More oil, more moving the oil around the board…

And then we have this … a board that looks just about brand new. And do I recommend one mineral oil over another? Not really… just find a mineral oil and run with it. This is the brand I have in the cupboard at the moment (in fact, I don’t remember where I bought it).

Any tips from anyone else?

enjoy your time in the kitchen…


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s